EW_FL140WF | 140W LED Flood Light focus
EW_FL140WF140W LED Flood Light focus
140W LED Flood Light focus
  • Item Number:EW_FL140WF
  • Product Name:140W LED Flood Light focus
  • Input Voltage:AC100~277V
  • Emitting Color:2700-7000k
  • Diffuser:Tempered Glass
  • Base Material:Aluminum
  • Electric Current Type:
  • Standard:CE /ROHS
  • Power:140W
  • Working Voltage:DC30~36V
  • IP rating: IP65
Widely used in the hotel, meeting room, offices, hospital, schools, factories, commercial lighting, shopping malls, supermarkets, kitchen, display, backlight and so on.
Application: 
Widely used in the hotel, meeting room, offices, hospital, schools, factories, commercial lighting, shopping malls, supermarkets, kitchen, display, backlight and so on.
Feature: 
1. Die casting aluminum housing and high intensity toughened glass cover 
2. Finished with epoxy powder paint, resistant to corrosion 
3. Finish standard colour: Black/Grey 
4. High quality anodised aluminium reflector 
5. High efficiency and power factor Meanwell LED driver 
6. Stainless steel screw 
7. Weaherproof and durable silicon rubber sealing gasket 
8. Instant start, flicker free, energy saving 
9. Bridgelux high bright LED chip and ideal heat dissipation design.

140W LED Flood Light focus

【1】specialty:

【A】 Adopting integrated Chip as light source with high lighting efficiency(70`80LM/W) ,high CRI(Ra>70),good quality heat dissipation,low light degradation.

【B】Aluminium alloy die cast sheel, good strength,high quality heat dissipation.anti corrosion and baking varnish surface,can be for outdoor using.

【C】Make a dedicated luminous intensity distribution design via the aluminium reflector,there are two options for lighting distribution,one is for focusing,another is for divergencing.

【D】Wide Input Voltage from 100V~264VAC,constant voltage constant current output,can start up at once,no flicker,lightning protection,PFC function available.


【2】 Shape Structure

Shell Material: Aluminum Alloy

Shell Color: hoar/ Black

Weight:13Kg



【3】Parameter


Input Voltage

AC100~277V

Color Rendering Index

Ra>70

Freqency Range

50~60Hz

Beam Angle

50°

Power Factor

>0.97

LED Reduction Rate

1~3% / 1,000Hrs

Power Efficiency

>87%

Color Temperature

2700~7000K

Working Voltage

DC30~36V

Working Temperature

-20℃~+45℃

LED Power

140W

IP Grade

IP65

Total Power

168W

Working Life-span

>35000H

Luminous Efficiency

70~80lm / W

Power line

VDE  3×0.75mm2

Connect wire

Brown→L   Blue→N   Yellow or Green→G


【4】Diagram of degradation for Luminous



1、The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way.

2、Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.


【5】Photomatric Data



【6】Illumination Distance/illuminance/Irradiated Area



【7】Packing specification

Packing Dimension:(L)662*(W) 360*(H) 264mm    1PC/CTN    15Kg


【8】Using and installing instructions

A.Installation Procedure



As Picture No.1 showed,fix the lamp to mounting surface with 3 screws.

As Picture No.2 showed,unscrew the retaining screw,take down the fitting.

As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

As Picture No.4 showed, Male Water joint, equip with 1 meter power wire.

As Picture No5 showed, Female water joint,, can be connected to input end of lamp when the light has been produced.

As Picture No.6 showed, Besides of normal wire connecting way, it’s convenient to installation, uninstallation, maintenance with the special equipment.


B.Mounting Method



Attentions:

1. Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2. Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

分享给朋友
product list
search